INTERNATIONAL BODY LIFT TECH NOTES
1	FRONT BUMPER BRACKETS ARE INCLUDED IN THIS KIT.
2	DOES NOT FIT MODELS EQUIPPED WITH AUTOMATIC TRANSMISSION.
3	OPTIONAL FRONT BUMPER RAISING KIT IS REQUIRED TO RAISE THE FRONT BUMPER (BKIT2/3)
4	VEHICLES WITH 1 PIECE SOLID STEERING SHAFT MUST INSTALL LONGER AFTERMARKET STEERING SHAFT IN CONJUNCTION WITH BODY LIFT.
	SEE BORGESON UNIVERSAL.
5	IT MAY BE NECESSARY TO DRILL THE FRONT TWO BODY BUSHING SLEEVES OUT TO 1/2" FOR NEW BOLT CLEARANCE.
6	FRONT AND REAR BUMPER BRACKETS ARE INCLUDED IN THIS KIT.
7	MODIFICATION TO THE FRONT FRAME HORNS WILL BE REQUIRED TO RAISE THE FRONT BUMPER USING THE BUMPER BRACKETS INCLUDED.
8	WILL NOT FIT 2 WHEEL DRIVE WITH POWER STEERING.
9	WILL NOT FIT 2 WHEEL DRIVE WITH STEERING GEAR BOX CLOSE TO FIREWALL (BEHIND FRONT AXLE).
10	INSTALLATION ON MODELS EQUIPPED WITH V-8 WILL REQUIRE REPLACEMENT OF LOWER RADIATOR HOSE AND FAN.
11	VEHICLES EQUIPPED WITH 6 CYL OR V-6 WILL REQUIRE REPLACEMENT OF LOWER RADIATOR HOSE TO AVOID CONTACT WITH SMOG PUMP.
12	IT WILL BE NECESSARY TO DRILL OUT SOME OF THE BODY BUSHINGS TO ACCOMMODATE LARGER BOLTS.
13	FRONT BUMPER BRACKETS WILL NEED TO BE MODIFIED FOR USE ON 2" KIT.
14	WILL NOT FIT VEHICLE EQUIPPED WITH DIESEL ENGINE.
15	STEERING EXTENSION INCLUDED.
16	VEHICLES EQUIPPED WITH VORTEC V-6 MAY REQUIRE MODIFICATION OF THE AIR INTAKE OR AIR INTAKE HOSE.
17	3" KIT INCLUDES FRONT AND REAR BUMPER BRACKETS, 2" KIT INCLUDES FRONT BUMPER BRACKETS ONLY.
18	REAR BUMPER CAN BE RAISED USING THE STOCK BUMPER BRACKETS.
19	INSTALLATION ON VEHICLES WITH AIR CONDITIONING WILL REQUIRE MODIFICATION TO THE RADIATOR MOUNTING FLANGE.
20	MANUAL TRANSMISSION MODELS WILL REQUIRE PART 3700 SHIFT EXTENSION (MAZDA TRANSMISSION ONLY).
21	REAR BUMPER BRACKETS ARE TO ENHANCE APPEARANCE ONLY, BUMPER CANNOT BE USED FOR TOWING.
22	KIT WILL NOT WORK ON VEHICLES EQUIPPED WITH MOVEABLE PEDAL PACKAGE.
23	95-03 ZR2 WILL REQUIRE MODIFICATION TO STEERING COLUMN MOUNTING FLANGE.
24	GAP GUARDS AVAILABLE AND SOLD SEPARATELY FOR THIS APPLICATION.
25	REAR BUMPER BRACKETS ARE AVAILABLE AND SOLD SEPARATELY FOR THIS APPLICATION.
26	NO BUMPER BRACKETS ARE INCLUDED IN THIS KIT
27	FRONT BUMPER CAN BE RAISED USING STOCK BUMPER BRACKETS.
28	MANUAL TRANSMISSION MODELS REQUIRE A SHIFT LEVER EXTENSION OR LINKAGE BRACKET SOLD SEPERATLY.
29	SEE OR-FAB JEEP PRODUCTS ALSO AVAILABLE.
30	WILL NOT FIT VEHICLE EQUIPPED WITH GASOLINE ENGINE.
31	S-15 BLAZER REAR BUMPER WITH FACTORY TOW HITCH CAN NOT BE RAISED
32	REQUIRES CUTTING THE LOWER RADIATOR CORE SUPPORT AND INSTALLING NEW BRACKETS PROVIDED.
33	2006 MANUAL TRANSMISSION MODELS REQUIRE KIT # SE9627 SHIFT EXTENSION
34	AUTOMATIC TRANSMISSION MODELS REQUIRE KIT #  9628 SHIFT EXTENSION BRACKET
35	REQUIRES CUTTING THE FRONT BUMPER FASCIA TO ALLOW CLEARANCE FOR FRONT FRAM HORNS.
36	CAN NOT USE TOW HOOKS
37	SOME CUTTING / TRIMMING REQUIRED